Anycubic Photon Mono Anime Figure & Statue STL Guide: Hollowing, Keying & Print Times
Step-by-step collector guide to printing 1/8 and 1/10 scale anime statues (Toji, Juri, Goku, Naruto, Luffy) with invisible seam lines.
Verified Printer & Slicer Profile (Anime Statue Resin Printing Guide)
Recommended Printers
Anycubic Photon Mono M5s / M7 Pro, Phrozen Sonic Mighty 8K/12K
Layer Height & AA
0.035 mm – 0.040 mm for smooth skin and hair gradients
Exposure / Nozzle Temp
2.2s normal exposure · 60 mm/min initial lift speed
Hollowing / Infill
2.2 mm wall on torso & base · 0% internal grid (easier internal UV curing)
Support Strategy
Place all heavy (0.55 mm) anchor supports inside the hidden key sockets
Post-Processing & Cure
Wet-sand mating keys with 400-grit paper · gap-fill with UV resin + pen torch
Anime & Gaming Legends 8-Pack — $9.99 $31.92
High-detail showcase anime display figures, iconic fighters & collector statues.
- 8 multi-part collector statue & figure STL zips ($1.25/model)
- ~6.0 hrs avg SLA print time · ~95 mL UV resin per statue
- 1/10 to 1/8 display collector scale with keyed joints
Print Time, Resin Volume & Dimension Comparison Table
Compare exact part counts, dimensions (mm), UV resin estimates (mL), and print hours before slicing
| 3D Model | Studio | Dimensions | Resin / PLA | Est. Time | Parts | Instant STL |
|---|---|---|---|---|---|---|
| Toji | 3Dmoonn | 230.0mm H × 100.0mm W × 100.0mm D | ~184 mL / ~220.8g | ~14.2h SLA / ~27.3h FDM | 15 STLs (1254.5MB) | $3.99 → |
| Juri | Anyone | 230.0mm H × 100.0mm W × 100.0mm D | ~184 mL / ~220.8g | ~18.6h SLA / ~36.1h FDM | 26 STLs (1060.3MB) | $3.99 → |
| Fantasy Miniatures Pack (November 2023) | Drunken Dwarf | 53.0mm H × 36.0mm W × 44.0mm D | ~21 mL / ~24.1g | ~2.9h SLA / ~5.9h FDM | 27 STLs (614.1MB) | $3.99 → |
| NARUTO UZUMAKI | GOM3D | 230.0mm H × 100.0mm W × 100.0mm D | ~184 mL / ~220.8g | ~15.4h SLA / ~29.7h FDM | 18 STLs (179.7MB) | $3.99 → |
| King of Pirates - One Piece | Luffy on Throne | 230.0mm H × 100.0mm W × 100.0mm D | ~184 mL / ~220.8g | ~16.6h SLA / ~32.1h FDM | 21 STLs (1135.1MB) | $3.99 → |
| Ken e Ryu, Street Fighter | Merge Project | 230.0mm H × 100.0mm W × 100.0mm D | ~184 mL / ~220.8g | ~29h SLA / ~56.9h FDM | 52 STLs (1081.5MB) | $3.99 → |
| Wolverine Samurai | Michel B Rodriguez | 230.0mm H × 100.0mm W × 100.0mm D | ~184 mL / ~220.8g | ~15h SLA / ~28.9h FDM | 17 STLs (782.6MB) | $3.99 → |
| Shogun Trunks (dragonball) | Ocampo Lopez Julio Cesar | 53.0mm H × 36.0mm W × 44.0mm D | ~21 mL / ~24.1g | ~2.9h SLA / ~5.9h FDM | 21 STLs (349.5MB) | $3.99 → |
| Shao Kahn from Mortal Kombat | Unknown Studio | 230.0mm H × 100.0mm W × 100.0mm D | ~184 mL / ~220.8g | ~16.6h SLA / ~32.1h FDM | 21 STLs (366.3MB) | $3.99 → |
| GOKU NAMEK DIORAMA | Supreme Studio | 230.0mm H × 100.0mm W × 100.0mm D | ~184 mL / ~220.8g | ~41.4h SLA / ~81.7h FDM | 83 STLs (1291.5MB) | $3.99 → |
Inspect Featured Anime Statue Resin Printing Guide Models in 360° 3D
$10.99$3.9915 partsToji
3Dmoonn
$10.99$3.9926 partsJuri
Anyone
$9.99$3.9927 partsFantasy Miniatures Pack (November 2023)
Drunken Dwarf
$10.99$3.9918 partsNARUTO UZUMAKI
GOM3D
$10.99$3.9921 partsKing of Pirates - One Piece
Luffy on Throne
$11.99$3.9952 partsKen e Ryu, Street Fighter
Merge Project
$10.99$3.9917 partsWolverine Samurai
Michel B Rodriguez
$8.99$3.9921 partsShogun Trunks (dragonball)
Ocampo Lopez Julio Cesar
$10.99$3.9921 partsShao Kahn from Mortal Kombat
Unknown Studio
$11.99$3.9983 partsGOKU NAMEK DIORAMA
Supreme Studio
$10.99$3.9916 partsBatman Robert Pattinson
Unknown Studio
$10.99$3.9918 partsFlame Trooper Sculpture
Star Wars 3D Models
Hiding Support Marks Inside Alignment Sockets
When orienting multi-part anime figures like Toji or Juri, rotate each limb and torso section so the male/female alignment peg faces downward toward the build plate. This places 90% of your structural heavy supports on the hidden internal joint surface, leaving skin, hair, and clothing untouched.
Preventing Resin Cracks Months After Painting
Hollowed anime statues crack only when uncured liquid resin remains trapped inside. Always punch at least two 3.5 mm drain holes at the lowest hidden joint face, flush the interior thoroughly with IPA using a syringe, and cure the hollow cavity with a 3mm 405nm UV LED lead before gluing the statue together.
Frequently Asked Questions (Anime Statue Resin Printing Guide)
- What scale are the anime statues in the Anime & Gaming Legends 8-Pack?
- Most showcase figures are sculpted at 1/8 to 1/10 collector scale (~180mm to 230mm tall assembled) and include 8–16 keyed STL parts for clean airbrushing and masking.
- How do I join multi-part resin statue pieces seamlessly?
- Use thick cyanoacrylate (CA) gel glue for the structural bond inside the key socket, then brush a thin bead of liquid UV resin along any hairline seam, wipe flush with a gloved finger dipped in IPA, and cure for 10 seconds with a UV flashlight.